Siemens M34 用户手册

 Gigaset M34 USB Ya-LBA/ englisch / A31008-M403-R101-3-7619 / Konfigurieren.fm / 02.12.2005

You can make various settings in the Gigaset M34 software: change the names of your 
devices, register or deregister base stations, connect devices to one another, control the 
power management feature and update the firmware if necessary

When connected to a base station, your PC is uniquely identifiable by its device name. 
You can change this device name as required.

ì

Open the Gigaset M34 software and select the M34 USB > Configuration option in 
the menu tree.
The working area shows the current device name of the Gigaset M34 USB.

ì

Enter the desired device name under Identification > Name:. The maximum length 
of the device name is 10 characters.

ì

Confirm your entry by pressing the return key (Return, Enter). 
The new device name is sent to the connected base station.

ì

Open the Gigaset M34 software and select the M34 USB > Configuration option in 
the menu tree.

ì

Under Base stations click on one of the <free base> options. 
The Register button is activated.

ì

Set the base station to registration mode. 
– Hold down the Registration key until you hear an acoustic signal or see a flashing 

LED to indicate registration mode. 

– Refer to the operating instructions for your base station for more details.

ì

Click on Register to begin registration. 
This opens the Register dialog.

ì

Enter the PIN for the base station (factory default "0000") and confirm your entry 
with OK.

ì

Wait until registration has been completed. 
The Register dialog is closed. 

ì

For further information refer to "Registering a base station" on page 15.

i

If you also want to change the device name of your PC for connections to 
another registered base station, first of all connect to the desired base 
station and then repeat this procedure.