Seiko dpu-s245 用户手册

 

- 

24

 - 

 

 

  When the message shown at the following is printed in the function setting mode, 

press the POWER switch. 

Load Default Setting?                Yes: Feed SW / No: Power SW 

 

HINT 

•  There are DIP switches from 1 to 4 in the printer, so set 8 bits within DIP 

switches respectively. 

•  In function setting mode, the POWER lamp blinks once by pressing 

either the POWER switch or the FEED switch.  Be sure to confirm the 
POWER lamp blinking in order to ensure proper operation. 

 

  If you press the FEED switch when the message shown at the following is 

printed, you can perform operation (2). 

  If you press the POWER switch instead of the FEED switch, the details of the 

printed DIP switch (DIP switch 1) are not changed, and the next DIP switch is 
selected (operation 1). 

DIP Switch setting mode. 
DIP SW-1=******** Change Setting?    Yes: Feed SW / No: Power SW 

 

HINT 

•  "********" in the message indicates the setting of the DIP switch.  The 

leftmost bit is the most significant bit (bit 8) and the rightmost bit is the 
least significant bit (bit 1). 

•  If DIP switches 1 to 4 are skipped, the function setting mode can be 

terminated (operation 3). 

(1) When the message shown at the following is printed, set the bits from the most 

significant bit (bit 8) to the least significant bit (bit 1). 

Input 8 bits.                  1: Feed SW / 0: Power SW 

  To set 1: Press the FEED switch. 
  To set 0: Press the POWER switch. 
  For example, to set 10101110, press the switches in the following sequence: