Epson EH-TW3800 用户手册

下载
页码 63
14
Starting and Stopping Projection
Turning the power on and projecting images
TIP
If you set the "Direct Power On" to "On", the power of the unit will turn ON when 
the main power switch is turned ON, without having to press the power button of 
the remote control or the projector's control panel.      p.36
If there is a problem with projection even though the projector is set up and connected correctly, 
refer to       p.15, 39.
The projector is equipped with a "Child Lock" function that prevents young 
children from accidentally turning the power on and looking into the lens, and 
also an "Control Panel Lock" function that prevents mis-operations.      p.36
When using above an altitude of about 1500 m, make sure you set the "High 
Altitude Mode" to "On".       p.36
This projector is equipped with an automatic 
adjustment function that automatically optimizes it 
when a computer input signal is switched.
If a laptop computer or a computer with a LCD 
screen has been connected to the projector, you 
may need to use keyboard or function settings to 
change the output destination. While holding down 
the        key, press        (the key with a symbol such 
as       /       on it). After the selection is made, 
projection will soon start.
     Computer's documentation
NEC
Panasonic
SOTEC
HP
Toshiba
IBM
LENOVO
SONY 
DELL
Fujitsu
Macintosh
Example of output selection
Set mirror setting or 
display detection.
Depending on OS, you can 
change the output 
selection by pressing        .
ON
Remove the lens cover.
Connect the
power cable.
Turn on the main power switch. 
Turn the power on for the 
connected equipment.
Turn the power on.
Control Panel
Remote Control
Do not look into the lens 
while projection is in 
progress.
(Commercially-
available)