Silex Technology SX-200 用户手册

 

 

Document #40181-420  Rev. A

 

13 

Before installing the print server, make sure you have installed and set up your printer as described in the 
documentation that came with the printer and that your printer functions properly.  SX-200 Series Print 
Servers support a parallel and/or USB connection to your printer. 

 
 
 

 

1.  Write down the 12-digit MAC address printed on the label located on the bottom of the print server 

(for example: 004017023F96).  You may need this number in order to configure the print server. 

2.  Mount the print server on either the printer or the desktop: 

ƒ  Printer mount – attach the print server to a suitable location on the side or rear of your printer by 

applying an adhesive Velcro strip (provided in the printer mounting kit) to your printer and at the 
top of the print server as it is to be attached to your printer. 

ƒ 

Desktop mount – attach the adhesive rubber feet (provided in the desktop mounting kit) to the 
bottom of the print server as shown below.