Silex Technology SX-200 用户手册

 

 

Document #40182-420  Rev. A 

 

31 

According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards 
and Power Supplies used with Class B Personal Computers: 

 

We: 

 

 

silex technology america, Inc. 

Located at: 

 

157 West 7065 South 
Salt Lake City, UT 84047, USA 

 
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of 
the FCC rules as a Class B digital device FOR HOME OR OFFICE USE.  Each product marketed, is 
identical to the representative unit tested and found to be compliant with the standards.  Records 
maintained continue to reflect the equipment being produced can be expected to be within the variation 
accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.909.  
Operation is subject to the following two conditions:  (1) this device may not cause harmful interference, 
and (2) this device must accept any interference received, including interference that may cause undesired 
operation. 

 

Trade Name:    

silex 

Type of Product:  

Ethernet and Wireless 802.11a, 802.11b, and 802.11g-enabled print server 

Model: 

  SX-200 

Series 

 
silex technology america, Inc. hereby declares that the equipment specified above conforms to the above 
requirements. 
 
Standards used and met in the assessment: 

 

ƒ  EN55022: 1998 Class B; CFR Title 47, Part 15, Subpart B, Subpart C, and Subpart E. 

 

The term “IC” before the radio certification number only signifies that Industry of Canada technical 
specifications were met.   Operation is subject to the following two conditions: (1) this device may not 
cause interference, and (2) this device must accept any interference, including interference that may cause 
undesired operation of the device. 

 

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment 
Regulations. 

 

To prevent radio interference to the licensed service, this device is intended to be operated indoors and 
away from windows to provide maximum shielding.  Equipment that is installed outdoors is subject to 
licensing. 

 

This device has been designed to operate with an antenna having a maximum gain of 2 dB.  Antenna 
having a higher gain is strictly prohibited per regulations of Industry Canada.  The required antenna 
impedance is 50 ohms. 

 

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen 
than the equivalent isotropically radiated power (EIRP) is not more than the required for successful 
communication.