TEAC dvw-d110h 用户手册

The Setup mode includes nine (9) functions. To enter the Setup mode, press and 
hold the SET button until you hear a beep. The LCD will then display SETUP. 
Press the SET button to scroll through the available functions. To exit the Setup 
mode, press and hold the SET button until you hear a beep. Each function is 
explained below.

This function is for factory use only.

The 

 function enables you to setup the ID and partition number of 

the hard disk drive.

The first two (2) digits are the ID number of the hard disk drive. This ID can range 
from 00 to 99. The remaining three (3) digits represent the position of the partition. 
The default setting is 00000.

This function allows you to set any changes or modification you have made as 
your default settings.

The 

 function updates the firmware on the interface board via a 

CD or DVD disc. The DVD Duplicator will locate the data and update its 
firmware automatically.

During the update, do not turn off the power to the unit. Once the update is 
complete, the LCD will display a message and all arguments will return to the 
default setting. Please restart the system to complete the firmware update 
procedure.

The 

 function controls the speed at which the source drive 

reads a CD-ROM.

The default setting is 

 (maximum) read speed.

❑ RUN: Modify parameter.

❑ SET: Save and quit.