Eureka 170 SERIES 用户手册

How to Use

(continued)

Release handle from vacuum
by pressing the black button
release and pulling up on
handle.

Adjust telescoping handle by grasping vacuum firmly in one
hand while pushing button on handle forward and sliding
handle to desired length.

Stick vac can be used for
above the floor cleaning.

Hand Vac

Changing And Cleaning Dust Cup Filters

CAUTION: Always unplug from electrical outlet before

opening the dust cup.

1. To open the dust cup, push release button and pull dust

cup away from vacuum.

2. Pull filter cover and filter away from vacuum.
3. Empty debris from the dust cup and brush debris from

filter cover and filter.

4. Occasionally rinse the filter cover and filter in cold water.

Then wait until they dry completely before placing them
back on vacuum.

5. Place the dust cup filter into filter cover and place filter

cover back on vacuum.

6. Reattach the dust cup to the vacuum.

CAUTION: Adequate airflow must be maintained at all

times through the cleaner. Any obstructions
will cause the motor to overheat resulting in
permanent damage.

Release

Button

Filters

Dust Cup

CAUTION: The hand vac is a very powerful unit. Make

sure that you hold it firmly, otherwise it can
slip out of your hand and cause injury.

1. Hold the hand vac firmly with your hand on handle.
2. Push the On (-) Off (0) power switch to “On (-)” position.
3. Start vacuuming.