HP Compaq KB-9965 311059-171 用户手册

Reverse steps 1 through 11 to replace the PCI backplane. 

 

To remove the system tray: 

1.  Prepare the server for a non-hot-plug procedure. Refer to “Preparing the Server for 

Non-Hot-Plug Procedures” in this chapter. 

2.  Remove the front bezel door (tower model only), and lay the server on its side with the 

access panel facing upward. Refer to “Removing the Front Bezel Door (Tower Model 
Only)” in this chapter. 

3.  Remove the access panel. Refer to “Removing the Access Panel” in this chapter. 

4.  Remove the processor air baffles. Refer to “Processor Air Baffles” in this chapter. 

5.  Remove the memory boards. Refer to “Removing a Memory Board” in this chapter. 

6.  Disconnect cables to all PCI expansion boards. 

7.  Remove any expansion boards from the PCI slots. Refer to “Expansion Boards” in this 

chapter.