Ariens 911086 - lm21, 911087 - lm21s 用户手册

GB - 9

Replace worn-out mufflers immediately. 
Continued use could result in fire or explosion.

Sharp edges can cut or amputate fingers or a 
hand. Wrap blade or wear sturdy gloves to 
service.

Use only replacement parts designed for your 
unit. See your Ariens Dealer.
Allow engine to cool before storing in any 
enclosure.

ALWAYS clean unit before extended storage. 
See engine manual for proper storage.

DO NOT store unit inside a building with fuel in 
the fuel tank where any ignition sources are 
present.

Use only accessories which have been 
approved by Ariens and are properly installed.
Check attachments frequently and replace 
worn or damaged components with 
manufacturer’s recommended parts.

1. Unfold and adjust handlebar. See Service 

2. Self-Propelled Models: The speed control 

rod is shipped on the handlebar with 
hardware in position. Remove hair pin, 
insert bent end of rod through hole in 
swivel of speed control bell crank, and 
retain with hair pin (Figure 5).

3. Fill engine crankcase with oil. See engine 

manual.

4. Assemble grass bag onto bag frame.

5. Set-up mower for bagging, side 

discharge or mulching. See Mower Set-
Up in Operation Section.

6. Fill fuel tank. See Operation Section.
7. Check the engine/blade control feature. 

Try starting the engine without the 
engine/blade control held against the 
handlebar. Engine must not start. If 
engine starts, stop engine and adjust or 
repair engine/blade control. See Service 
and Adjustments.

CAUTION: AAVOID INJURY. Read 
and understand the entire Safety 
section before proceeding.

Figure 4

1. Mower Unit
2. Side Discharge Deflector
3. Grass Bag
4. Grass Bag Frame
5. Literature Pack

OM0350

2

3

1

4

5

OM1222

OM0330

OM0320

OM0340