Troy-Bilt 769-08234 用户手册

• 

One Snow Thrower

• 

One 20 oz. Bottle 5W-30 Oil

• 

Two Ignition Keys

• 

One Chute Assembly

• 

One Chute Rotation Control (If equip.) • 

One Set of Drift Cutters (If equip.)

• 

One Electric Starter Cord (If equip.)

• 

One Snow Thrower Operator’s Manual • 

One Engine Operator’s Manual

NOTE: This Operator’s Manual covers several models. Snow 

thrower features may vary by model. Not all features in this 

manual are applicable to all snow thrower models and the snow 

thrower depicted may differ from yours.
NOTE: All references to the left or right side of the snow thrower 

are from the operator’s position. Any exceptions will be noted.

• 

• One 5/16-inch wrench (or adjustable wrench)

• 

• One 1/2-inch wrench (or adjustable wrench)

1. 

Remove the wing knob and carriage bolt from the top 

of the lower handle. See Figure 3-1. It is not necessary to 

remove the shoulder screw and flange lock nut below the 

wing knob and carriage bolt.

2. 

Pivot the upper handle into the operating position. Be sure 

not to pinch any of the cables in the process. See Figure 3-2.

1. 

Remove the hex washer screws in the chute base. See 

Figure 3-3.