Pioneer VSX-AX4AVi-S 用户手册

 

En

 

The following section shows you how to make detailed 
settings to specify how you’re using the receiver (for 
example, if you want to set up two speaker systems in 
separate rooms), and also explains how to fine-tune 
individual speaker system settings to your liking.

 

Use the 

 

 

 button to switch on.

 

1

 

• If headphones are connected to the receiver, 

disconnect them.

 

An on-screen display (OSD) appears on your TV. Use the 

 

///

 

 buttons and 

 

 to navigate through the 

screens and select menu items. Press 

 

 to 

confirm and exit the current menu.

• Press 

 

 at any time to exit the System Setup 

menu.

 

•

 

– See 

 

 on page 7 for a quick and 

effective automatic surround setup. See 

 

 below for a more detailed setup.

•

 

 – Specify how you are using your 

surround back speakers (see 

 

 on page 35).

•

 

 – Fine tune your speaker settings 

and customize the Acoustic Calibration EQ (see 

 

 on page 36).

•

 

 – Check your MCACC presets 

and manage them through copying, renaming or 
deleting (see 

 

 on page 41).

•

 

 – Specify the size, number, 

distance and overall balance of the speakers you’ve 
connected (see 

 

 on page 42).

•

 

 – Specify what you’ve connected to the 

digital and component video inputs (see 

 

 on page 60).

•

 

 – Make customized settings to reflect 

how you are using the receiver (see 

 

 on page 61).

 

If your setup requires more detailed settings than those 
provided in 

 

 on page 7, you can customize your setup 

options below. You can calibrate your system differently 

for up to six different MCACC presets

 

3

 

, which are useful 

if you have different listening positions depending on the 
type of source (for example, watching movies from a sofa, 

or playing a video game close to the TV).

 

4

 

• Make sure the microphone and speakers are not 

moved during the Auto MCACC Setup.

• Using the Auto MCACC Setup will overwrite any 

existing settings for the MCACC preset you select.

 

5

 

• The screen saver will automatically appear after three 

minutes of inactivity.

 

• The test tones used in the Auto MCACC Setup are 

output at high volume.

 

1 Make sure not to switch off the power when using the System Setup menu.

2 • Note that when editing items in the 

 

 menu, you will need to first specify the MCACC preset you want to adjust by pressing 

 

 before pressing 

 

.

 

• You can’t use the System Setup menu when the iPod input source is selected (in either the main or sub room).

 

3 These are stored in memory and referred to as 

 

–

 

 (or 

 

–

 

) until you rename them in 

 

 on page 41.

4 You may also want to have separate calibration settings for the same listening position, depending on how you’re using your system.

5 Except in cases where you are only adjusting one parameter (i.e. channel level) from the 

 

 setup screen (step 3).

VSX_AX4AVi.book.fm 33 ページ ２００５年６月２０日　月曜日　午後６時２７分