Lowrance electronic globalmap baja 840c 用户手册

下载
页码 164
20 
NOTE: 
You do not need a Bus Adapter Cable with this unit if you use an 
approved Devicenet NMEA 2000 connector. Approved Devicenet 
NMEA 2000 connectors work with Lowrance red connector dis-
play units and components, so no adapter cables are needed.  
Mounting the Unit: Bracket 
You can install the GlobalMap Baja on the top of a dash with the sup-
plied gimbal bracket.  
If you use the supplied bracket, you may be interested in the optional R-A-
M
®
 bracket mounting system. This converts the unit's gimbal bracket to a 
swivel mount, which can be used on the dash or overhead mounting posi-
tions. Installation instructions are supplied with the R-A-M mounting 
kits. R-A-M offers permanent mounts and temporary mounts suitable for 
many vehicle types. See your Eagle dealer or visit the LEI web site 
(
www.lei-extras.com
) for the latest options; accessory ordering information 
is on the inside back cover of this manual. For a complete look at the 
many mounting options, visit the RAM web site at 
www.ram-mount.com
 
Optional R-A-M mounting system. 
Bracket Installation 
Mount the in any convenient location, provided there is clearance behind 
the unit when it's tilted for the best viewing angle. You should also make 
sure there is enough room behind the unit to attach the power and GPS 
antenna/receiver module cables (Drawings beginning on the next page 
shows the dimensions of the gimbal-mounted.). 
Holes in the bracket's base allow wood screw or through-bolt mounting. 
You may need to place a piece of plywood on the backside of thin fiber-
glass panels to reinforce the panel and secure the mounting hardware.