Philips ct1208-tu1u10hk 用户手册
5
3
Take off the cover by lifting it from the side of the phone, as
shown opposite.
shown opposite.
4
Then twist it to remove it.
L
Make sure you handle the product with care when the front is
removed, in order not to damage the keys which are then
unprotected.
removed, in order not to damage the keys which are then
unprotected.
5
Remove the keypad from the front cover you removed,
then place it in the new front cover.
then place it in the new front cover.
6
Put the new front cover on your phone: hook the front
housing onto the hinges on the top of the phone (1), then
press the bottom down until the latches catch (2).
housing onto the hinges on the top of the phone (1), then
press the bottom down until the latches catch (2).
7
Slide the battery pack into its slots, until it stops (1). Then
push the clip downwards (2).
push the clip downwards (2).
8
Replace the bottom part on your phone by sliding it until
latch catches.
latch catches.
Fisio120_GB_4311 255 51322.book Page 5 Vendredi, 24. mai 2002 3:54 15