Philips dvdr3350h 用户手册
E
ng
li
sh
19
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
TV has only an antenna
input jack
input jack
Use this connection if your TV has only a
single Antenna In jack (or labeled as
75 ohm or RF IN) and does not have any
audio/video jacks.
single Antenna In jack (or labeled as
75 ohm or RF IN) and does not have any
audio/video jacks.
For this connection, you need a RF
modulator in order to view the disc
playback.
modulator in order to view the disc
playback.
A
You may have an Antenna/Cable TV
signal (or from the Cable Box/Satellite
Receiver/VCR) connected to your TV’s
antenna input jack (VHF/UHF RF IN.)
Remove it from the TV and connect it to
the ANTENNA
Receiver/VCR) connected to your TV’s
antenna input jack (VHF/UHF RF IN.)
Remove it from the TV and connect it to
the ANTENNA
jack on the recorder.
B
Use the supplied RF coaxial cable to
connect the TV
jack on the recorder
to the antenna input jack on the RF
modulator.
modulator.
C
Use an RF coaxial cable (not supplied) to
connect the TO TV jack on the RF
modulator to the antenna input jack on
your TV.
modulator to the antenna input jack on
your TV.
D
Use the supplied AV cables (yellow ends)
to connect the VIDEO (CVBS) -
OUT2 jack on the recorder to the video
input jack (or labeled as A/V In, Video In,
Composite or Baseband) on the RF
modulator.
OUT2 jack on the recorder to the video
input jack (or labeled as A/V In, Video In,
Composite or Baseband) on the RF
modulator.
E
Use the supplied AV cables (red/white
ends) to connect the AUDIO L/R -
OUT2 jacks on the recorder to the
audio input jack (or labeled as AUDIO IN
or LINE IN) on the RF modulator.
OUT2 jacks on the recorder to the
audio input jack (or labeled as AUDIO IN
or LINE IN) on the RF modulator.
Helpful Hints:
– If you have used the TV
– If you have used the TV
jack to
connect your recorder to TV, set your TV to
channel 3 or 4. If you have used
AUDIO/VIDEO OUT2 connections, set the
TV to the appropriate video input channel.
– See your electronics retailer for details on
RF modulator availability and operations.
channel 3 or 4. If you have used
AUDIO/VIDEO OUT2 connections, set the
TV to the appropriate video input channel.
– See your electronics retailer for details on
RF modulator availability and operations.
Step 2 : Optional Connections
ANTENNA
TV
EXT
1
VIDEO
(CVBS)
AUDIO
S-VIDEO
(Y/C)
AUDIO
AUDIO
R
L
PB
OUT 2
VIDEO
(CVBS)
OUT 1
Y
PR
COAXIAL
DIGITAL AUDIO OUT
L
R
AUDIO IN
R L
VIDEO
IN
TO TV
ANT IN
CH3 CH4
TV
CABLE
SATELLITE
ANTENNA
A
B
C
D
E
Back of an RF
Modulator
(Example only)
Modulator
(Example only)