Philips FW-C80 用户手册

23

3139 116 19681

5 Press CLOCK/TIMER to store the start

time.
™ The timer is now set.
™ The 

 remains on the display.

• At the preset time, the timer will be

activated.
™ The selected source will be played.

Notes:
– During timer setting, if no button is

pressed within 90 seconds, the system
will exit timer setting mode
automatically.

– If the source selected is TUNER, the last

tuned frequency will be switched on.

– If the source selected is CD, playback

will begin with the first track of the
selected disc or program. If the CD trays
are empty, TUNER will be selected
instead.

– If the source selected is TAPE, and if the

preset time is reached during high
speed dubbing, the TUNER will be
selected instead.

– The timer will not activate if a recording

is in progress.

(only on remote control)

This feature allows you to select a length
of time after which the system will switch
to the standby mode automatically.

1 Press SLEEP on the remote control

repeatedly to select a period of time.
™ The selections are as follows (time in

minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF
™ 60 …

™ "SLEEP XX" or "OFF" will be

displayed. "

XX" is the time in

minutes.

2 When you reach the desired length of

time, stop pressing the SLEEP button.
™ After this amount of time passes, the

system will switch to the standby
mode.

To switch off the Sleep Timer
• Press SLEEP repeatedly until "

OFF" is

displayed, or press the STANDBY ON
button.

To switch off the TIMER
• Press TIMER ON/OFF on the remote

control.
™ The timer is now switched off.
™ The display will show "CANCEL"

and the 

 disappears.

(for the same

preset time and source)
• Press TIMER ON/OFF on the remote

control.
™ The timer is now on.
™ The 

 appears on the display.

pg 01-26/C80/22-Eng

3/6/00, 2:24 PM

23