Philips FW-R88FW-R88 用户手册

You can select tracks and store them either in the CD changer
or CD recorder memory. If you use the program for playback
you can choose one of the two memories, else if you like to
specify tracks for recording, use the CD changer memory only!
You can store any track more than once.

1 Load the desired disc(s) in the disc tray(s).

2 Press either CD 1, CD 2, CD 3, or CDR to select the disc.

3 Press PROG on the set (PROGRAM on the remote control).

y

starts blinking and Program is displayed.

Rotate í JOG CONTROL ë to select either:

y

CD1 (or 2, 3) All: All tracks of CD 1 (or 2, 3) will be
programmed.

y

CD1 (or 2, 3) and track number: The track number of
CD 1 (or 2, 3) will be programmed.

If CDR is selected:
Rotate í JOG CONTROL ë (press the numerical keys on
the remote control; for 2-digit numbers, press the keys in
rapid succession) to select a track number.

5 Press YES to store your selection in the memory.

y

The number of programmed tracks (

), Prog and the

total program time are displayed. The track number
blinks in the music calendar.

6 Select and store all desired tracks in this way.

7 Press PROG on the set (PROGRAM on the remote control) to

end programming.

y

stays shown and the program is currently available.

reached, the display shows Program full.

1 If necessary press Ç STOP on the set (Ç on the remote

control) to stop playback.

2 Press either CD 1, CD 2, CD 3, or CDR to select the desired

memory.

3 Press PROG (PROGRAM on the remote control), followed by

à

SEARCH or á SEARCH (à or á on the remote

control) to move through the program steps.

y

The track number at the selected step and the total
program time are displayed.

4 Press NO to remove the track from the program.

y

Cleared is displayed briefly.

y

The next programmed track number will move up to this
position and is displayed together with the step number
and the remaining total program time.

1 If necessary press Ç STOP on the set (Ç on the remote

control) to stop playback.

2 Press NO.

y

Clear Prog? is displayed.

3 Press YES to clear the program.

y

Prog Cleared will be displayed and 

goes off.

1 Select and store all desired tracks in the CD changer

memory (see “Programming track numbers”).

2 Enter the recording menu (see “Internal recording”).

• If the total time of the program is of bigger size than the

remaining recording time of the CDR(W):

y

Does Not Fit will be displayed briefly, followed by
the remaining recording time and Record Prog?

If you nevertheless start recording, only those tracks of the
program that fit onto the CDR(W) will be recorded in entirety.

•To change the program press NO.

y

Program will be displayed briefly, 

and the time of

the program start blinking. Now you can change the
program (see “Programming track numbers”, “Erasing a
track from the program” and “Clearing the program”).

MIC

MIC

LEVEL

REC TYP

E