Philips hts3107 用户手册

35

(underlined options are the factory default settings)

Speakers Volume 

Access the speaker’s level setup menu.  Use W X keys to adjust 

the volume level for each connected speaker between -6dB to 
+6dB.  

Speakers Delay 

Access the speaker’s distance setup menu.  Use W X keys to set 

the delay times for the centre and rear speakers based on the 
listening position and distance.

Note:  1 ms increase/decrease of delay time is equivalent to 30 cm 
change in distance.  Use the longer delay time settings when the rear 
speakers are closer to the listener than the front speakers.

Night Mode 

This mode optimises playback of sound at low volume.  High 

volume outputs will be softened and low volume outputs will be 
enhanced to an audible level.  This feature is only applicable for 
DVD video discs with Dolby Digital mode.

{ On } 

–  Turns on night mode.

{  Off } 

–  Turns off night mode feature. Selects this to 

enjoy the surround sound with its full 
dynamic range.

CD Upsampling 

This feature enables you to convert your music CD to a higher 

sampling rate using sophisticated digital signal processing for 
better sound quality.  If you have activated the CD upsampling 
feature, the system will automatically switch to stereo mode.

{ Off } 

–  Turns off CD-upsampling.

{  88.2 kHz (X2) } –  Select this to convert the sampling rate of 

the CDs twice as high as the original rate.

Note:  If you press the SURR button on the remote control to select 
multi-channel mode, it will turn off the CD upsampling feature.