Philips mc-55-21m 用户手册
23
English
point 2
Clock/Timer
To activate/deactivate the TIMER
● Press TIMER ON/OFF (SET) (or TIMER on
the remote control).
➜ If activated,
➜ If activated,
TIMER
will appear on the display.
Notes:
– The timer will not be activated if the starting
and stopping time are the same.
– If the selected source (CD or TAPE) is not
available when preset timer is reached, TUNER will
be selected automatically.
– During timer setting, if no button is pressed
within 10 seconds, the system will exit timer setting
mode automatically.
– The timer will not be activated if the starting
and stopping time are the same.
– If the selected source (CD or TAPE) is not
available when preset timer is reached, TUNER will
be selected automatically.
– During timer setting, if no button is pressed
within 10 seconds, the system will exit timer setting
mode automatically.
Sleep timer setting
If the sleep timer is activated, the system will
switch to standby mode after the selected time
has expired.
switch to standby mode after the selected time
has expired.
1
When the SLEEP on the
remote control is pressed
for the first time, the set
turn to sleep mode.
➜ “
remote control is pressed
for the first time, the set
turn to sleep mode.
➜ “
SLEEP OFF” will be
displayed.
2
Press SLEEP again
repeatedly to select a sleep time.
➜ The selections are as follows:
repeatedly to select a sleep time.
➜ The selections are as follows:
120 MIN ™ 110 MIN … …™ 20 MIN ™
10 MIN ™ 1 MIN ™ SLEEP OFF™
120 MIN… …
3
When you reach the desired length of time, stop
pressing the SLEEP button.
➜
pressing the SLEEP button.
➜
SLEEP
will appear on the display, except for
“
SLEEP OFF” mode.
While SLEEP mode is activated
To check the remaining length of time
● Press SLEEP once.
➜ "
XXX MIN" will be displayed. "XXX" is the
time in minutes.
To change the preset sleep timer
● Press SLEEP twice.
➜ The display will show the remaining time
followed by the nearest sequence of sleep timer
options.
followed by the nearest sequence of sleep timer
options.
To deactivate the Sleep Timer
● Press SLEEP repeatedly until "
SLEEP OFF" is
displayed, or press the STANDBY ON button.
Notes:
– Press and hold the CLOCK button on the system
to switch to sleep mode, the CLOCK button will
now able to operate the same function as SLEEP
button on the remote control.
– If timer off and the sleep off are all activated,
the system will switch to standby mode by the
earlier time set.
– Press and hold the CLOCK button on the system
to switch to sleep mode, the CLOCK button will
now able to operate the same function as SLEEP
button on the remote control.
– If timer off and the sleep off are all activated,
the system will switch to standby mode by the
earlier time set.
SLEEP
1
pg 001-026/MC55/21-Eng
6/8/01, 1:41 PM
23