Philips psa200-17b 手册

 
1.  Download the zip file from the site. Then unzip the file into a temp folder on your 

computer.  

 
2. At Start->Programs->Nike->psa200, select and launch “Upgrader”. 
 

3.  When the user starts the Upgrader with no device connected, the following screen 

is seen with the 

Start

 button disabled. 

 

 
 

•  The 

Start

 button is enabled only when the correct device is connected 

 

 

 
 

•  Click on the”…” button to browse and select the unzipped firmware file to be 

loaded into the device and then click open 

 
   - Place a fresh battery to the set and connected to the PC 
 

•  The user is informed that the device will be upgraded with the new firmware. 

On pressing OK, the firmware is loaded. 

 

 

 

•  Disconnect the device so that the device upgrades to the new firmware