Crestron c2n-dbf12 c2n-dbn12 用户手册

Crestron C2N-DBF12 & C2N-DBN12 Decorator 

Keypads

When wiring the network, consider the following:  

•  Use Crestron

©

 Certified Wire. 

•  Use Crestron power supplies for Crestron equipment. 
•  Provide sufficient power to the system. 

CAUTION:  Insufficient power can lead to unpredictable results 
or damage to the equipment. Please use the Crestron Power 
Calculator to help calculate how much power is needed for the 
system (

). 

•  For larger networks, Use a Cresnet Hub/Repeater (CNXHUB) to 

maintain signal quality 

For more details, refer to “Check Network Wiring” on page 20. 

The Net ID of the C2NDBF/N12 has been factory set to 71. The Net IDs 
of multiple C2NDBF/N12 devices in the same system must be unique. 
Net IDs are changed from a personal computer (PC) via the Crestron 
Toolbox

™

. When setting the Net ID, consider the following: 

•  The Net ID of each unit must match an ID code specified in the 

SIMPL Windows program. 

•  Each network device must have a unique Net ID. 

For more details, refer to the Crestron Toolbox help file. 

The following tools/hardware are required for installation. 

•  Cresnet network cable (sold separately) 
•  Phillips screwdriver (not supplied) 
•  Two 1-in. pan head Phillips screws (supplied) 

•  7