Pantech G800 用户手册
69
68
Auto power alarm
Software version
Settings
Allows you to check the software version of your
handset.
handset.
If the alarm has been set through the “auto power alarm on/off” and the
phone power turned off, the alarm will ring at the time set by the user
while the phone power is turned on automatically. After the alarm, the
handset power will be turned off automatically.
phone power turned off, the alarm will ring at the time set by the user
while the phone power is turned on automatically. After the alarm, the
handset power will be turned off automatically.
You can turn on or off the answering machine by selecting this button.
Press the right or left key to change between the On and Off.
When the answering machine is activated, a “mike” icon appears
on the idle screen.
Press the right or left key to change between the On and Off.
When the answering machine is activated, a “mike” icon appears
on the idle screen.
A unique feature of Pantech mobile phones is the Answering Machine
function, which allows a user to record up to 10 messages. The user can
also overhear the recording and can choose to accept or reject the call.
To access answering machine press [MENU]
function, which allows a user to record up to 10 messages. The user can
also overhear the recording and can choose to accept or reject the call.
To access answering machine press [MENU]
4
7
Answering machine
Settings:
You can set the response time, after which the answering machine
becomes activated.
One can choose a response time of 3 secs. 5 secs. or 10 secs.
becomes activated.
One can choose a response time of 3 secs. 5 secs. or 10 secs.
Response Time:
For the response message for an incoming call, you can choose from a set of 3
predefined messages and one user defined message.
Absent: “I am not available right now, please leave a message after the tone.”
Meeting: “I am in a meeting right now, please leave a message after the tone.”
Driving: “I am driving right now, please leave a message after the tone”
User message is a message that the user can record as shown in the next menu
(Recording).
predefined messages and one user defined message.
Absent: “I am not available right now, please leave a message after the tone.”
Meeting: “I am in a meeting right now, please leave a message after the tone.”
Driving: “I am driving right now, please leave a message after the tone”
User message is a message that the user can record as shown in the next menu
(Recording).
Response Message:
Recording
By selecting this key, you can record messages of your choice to be
played on the answering machine.
Press the [ ]key to start recording, by speaking clearly into the mouth
piece/ microphone.
The maximum recordable time is 15 secs.
Once a message is recorded, User Defined Message is automatically
selected as the Response Message.
played on the answering machine.
Press the [ ]key to start recording, by speaking clearly into the mouth
piece/ microphone.
The maximum recordable time is 15 secs.
Once a message is recorded, User Defined Message is automatically
selected as the Response Message.
User message
Select this key to hear the recorded message.
Press the [ ] key to hear the recorded message.
In case the user wishes to delete the recording, press the [ ] key and
select “Delete”.
Message can be re-recorded by selecting the “Recording” key again.
If message is deleted, the answering machine is reset to “absent” mode.
(“I am not available right now, please leave a message after the tone”)
Press the [ ] key to hear the recorded message.
In case the user wishes to delete the recording, press the [ ] key and
select “Delete”.
Message can be re-recorded by selecting the “Recording” key again.
If message is deleted, the answering machine is reset to “absent” mode.
(“I am not available right now, please leave a message after the tone”)
g800en07-2 2004.7.6 3:58 PM 페이지68