Makita 6095d 用户手册
3
ENGLISH
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
The tool is intended for drilling and screw driving in wood,
metal and plastic.
SPECIFIC SAFETY RULES
GEB002-2
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to drill
safety rules. If you use this power tool unsafely or
incorrectly, you can suffer serious personal injury.
1. Hold power tools by insulated gripping surfaces
from repeated use) replace strict adherence to drill
safety rules. If you use this power tool unsafely or
incorrectly, you can suffer serious personal injury.
1. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal
parts of the tool “live” and shock the operator.
tool may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal
parts of the tool “live” and shock the operator.
2. Always be sure you have a firm footing. Be sure
no one is below when using the tool in high loca-
tions.
tions.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. Do not leave the tool running. Operate the tool
4. Keep hands away from rotating parts.
5. Do not leave the tool running. Operate the tool
only when hand-held.
6. Do not touch the drill bit or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
and could burn your skin.
7. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
1. Set
plate
2. Battery
cartridge
3. Switch
trigger
4. Reversing
switch
5. Arrow
6.
Speed change knob
7. Low
speed
8. High
speed
9. Adjusting
ring
10. Pointer
11. Tighten
12. Sleeve
13. Ring
12. Sleeve
13. Ring
Model
6095D
Capacities
Steel
10 mm
Wood
18 mm
Wood screw
5.5 mm x 55 mm
Machine screw
6 mm
No load speed (min
-1
)
High
0 - 1,100
Low
0 - 400
Overall length
270 mm
Net weight
1.7 kg
Rated voltage
D.C. 9.6 V