Murphy diagnostic display pv10 用户手册

 

 
 

™ - Model PV10 – Diagnostic Display 

 

•  Display supports electronically controlled engines and 

equipment applications that use SAE J1939 Controller Area 
Networks.  

•  Displays Active and Stored diagnostic trouble codes for 

diagnosing equipment malfunctions.  

•  Displays Engine Hours, SPN, FMI, and OC information on a 

graphic display.  

•  Provides enhanced visual alarm indication using Ultra-bright 

ALARM or SHUTDOWN LEDs (amber and red).  

•  Simple installation and connections to the system bus.  

• 

Rugged design for demanding applications includes backlit 

display and is sunlight viewable.

 

The PV10 Diagnostic display is a CAN device that receives data from a 
controller or ECU and then displays Active and Stored Fault messages and 
Engine Hours.   

The default mode provides hourmeter data from the ECU for cumulative 
engine hours.  

The PV10 is equipped with two buttons to quickly select between Active or 
Stored Faults, a graphic display, two LED to indicate the Active fault's Alarm 
or Shutdown status in a sealed enclosure that matches the PowerView line 
of gages.  

Fault messages are formatted to display SPN (Suspect Parameter Number), FMI (Failure Mode Indicator) and OC 
(Occurrence Count) codes that conform to the SAEJ1939 protocol.