Garmin aera 560 用户手册

Appendix

My aera never gets 

satellite signals.

Take your aera out of parking garages and away from tall buildings and trees. Remain stationary for several minutes. 

My aera does not 

charge in my vehicle.

Check the fuse in the vehicle power cable. 

Ensure the vehicle is turned on and is supplying power to the power outlet. 

Your aera can only charge between 32°F and 113°F (between 0°C and 45°C). If the aera is placed in direct sunlight or in a hot 

environment, it cannot charge. 

How do I clear all my 

user data?

1.  Hold your finger on the lower-right corner of the aera screen while it is turning on. 

2.  Keep your finger pressed until the message appears. 

3.  Touch 

 to clear all user data.

The aera is locked 

up/frozen.

If the aera screen stops functioning, turn off the aera, and then turn on the aera. If this does not help, remove the battery and then 

reinstall the battery. The aera should operate normally.

The touchscreen is 

not responding to my 

touches properly.

1.  Turn off the aera. 

2.  Hold your finger on the screen and then press and hold the 

 button. 

3.  Hold until the calibration screen appears. 

4.  Follow the on‑screen instructions.

My battery gauge does 

not seem accurate.

Allow the unit to fully discharge, and then fully charge it (without interrupting the charge cycle).

My phone will not 

connect to the aera.

Touch 

 > 

 > 

. Verify that the Bluetooth field is set to 

.

Ensure your phone is turned on and is less than 33 feet (about 10 meters) away from your aera. 

 for more help.

How do I know my aera 

is in USB mass storage 

mode?

When your aera is in USB mass storage mode, a picture of an aera connected to a computer is shown. Also, you should see two 

new removable disk drives listed in 

.