Konica Minolta magicolor 5430 dl 用户手册

With

 

N-up on 

multiple cop-
ies, the out-
put is 
incorrect.

Both the driver and 
the application have 
been set for collation.

For N-up on multiple copies, choose 
Collate only in the driver’s Paper Tab. 
Do not set collation in the application.

Booklet Left 
and Right 
Binding out-
put is incor-
rect.

Both the driver and 
the application have 
been set for collation.

For Booklet Left Binding and Booklet 
Right Binding, choose Collate only in 
the driver’s Paper Tab. Do not set colla-
tion in the application.

You hear 
unusual 
noises.

The printer is not 
level.

Put the printer on a flat, hard, level sur-
face not to exceed ±1° slant in any 
direction.

The tray is not 
installed correctly.

Remove the tray that you are printing 
from and reinsert it completely into the 
printer.

There is a foreign 
object stuck inside 
the printer.

Turn off the printer and remove the 
object. If you cannot remove it, contact 
Technical Support. 

The 
web-based 
utility cannot 
be accessed.

The PageScope Web 
Connection Adminis-
trator’s password is 
incorrect.

The PageScope Web Connection 
Administrator password has a 6-char-
acter minimum and a 16-character 
maximum. 

Media is 
wrinkled.

The media is moist 
from humidity or hav-
ing water spilled on it. 

Remove the moist media and replace it 
with new, dry media. 

The transfer roller or 
fuser unit is defective.

Check them for damage. If necessary, 
contact Technical Support with the 
error information.

Unsupported media 
(wrong size, thick-
ness, type, etc.) is 
being used.

Use KONICA MINOLTA-approved 
media. See “Media Specifications” on 
page 32 for supported size. For a com-
plete list of approved media, go to 
www.printer.konicaminolta.com.