Mercedes Benz 2007 r 350 用户手册

下载
页码 570
253
Controls in detail
Power windows
Fully opening the door windows 
(Express-open)
Press switch
1, 2, 3, or 6 
page 251) past the resistance point 
and release.
The corresponding door window opens 
completely.
Fully closing the door windows 
(Express-close)
Pull switch
1, 2, 3, or 6 
page 251) past the resistance point 
and release.
The corresponding door window closes 
completely.
If the upward movement of a door window 
is blocked during the closing procedure, 
the door window will stop and open 
slightly.
Remove the obstruction.
Pull the respective power window 
switch past the resistance point again 
and release.
Stopping door windows during 
Express-operation
Press or pull the respective door 
window switch again.
Hinged quarter windows*
The switches for opening and closing the 
hinged quarter windows are located on the 
door control panel of the driver’s door 
(
1 Hinged quarter windows: opening
2 Hinged quarter windows: closing
Warning!
G
Driver’s door only:
If within 5 seconds switch is again pulled 
past the resistance point and released, the 
automatic reversal will not function.
i
If the door window still does not close when 
there is no obstruction, pull and hold the respec-
tive power window switch. The door window will 
then close without the obstruction sensor 
function.