Mitel networks 5303 用户手册
4
2
The short phone cord has a different connector on each
end. Connect the end with the larger connector (RJ45) to
end. Connect the end with the larger connector (RJ45) to
the remaining jack (labeled with a phone jack icon )
on the 48 V DC Power Adapter. Refer to Figure 2.
on the 48 V DC Power Adapter. Refer to Figure 2.
3
Connect the other end of the short phone cord to a modular
wall jack.
4
Plug the 48 V DC Power Adapter into an electrical outlet.
Refer to Figure 3 for the overview of the 5303 Conference
Refer to Figure 3 for the overview of the 5303 Conference
Phone setup.
5
Using a felt-tip marker, write the unit’s phone number on one
of the Phone Number Tags, and attach it to the phone cord.
of the Phone Number Tags, and attach it to the phone cord.
Refer to Figure 3.
Note: If you experience difficulty setting up a three-way
conference call (or activating other service provider features),
conference call (or activating other service provider features),
change the hook flash time. For more information, see the
section on the ‘Installation Menu’.
section on the ‘Installation Menu’.
Figure 2: 48 V DC Power Adapter
Caution: Mitel Networks-supplied 48 V DC Power Adapters are
the only adapters accepted by Mitel Networks Corporation for
connection to the 5303 Conference Phone.
connection to the 5303 Conference Phone.