Motorola 7.7.4 用户手册

266

You must put the location_info argument in double-quotes if it contains embedded 
spaces.

Sets the type of SNMP notifications that the system will generate: 

•

v1-trap – This selection will generate notifications containing an SNMPv1 Trap Protocol 
Data Unit (PDU)

•

v2-trap – This selection will generate notifications containing an SNMPv2 Trap PDU

•

inform – This selection will generate notifications containing an SNMPv2 InformRe-
quest PDU.

SNMP V3 is suppor ted beginning with Firmware Version 7.4.

SNMPv3 suppor ts two users, the Read-Only user and the Read-Write user. The read-only 
account will have read-only access to all objects known to the agent, while the read-write 
account will have read-write access to all objects known to the agent. SNMPv3 adds the 
ability to authenticate and/or encr ypt management traffic.

For security reasons, enabling SNMPv3 will disable SNMPv1/v2.

•

If SNMPv3 is enabled, the firmware will no longer respond to SNMPv1/SNMPv2 traffic, 
nor generate SNMPv1/v2 traps in SNMPv1/SNMPv2 packets. If it receives v1 or v2 
packets when v3 is enabled, it behaves as if it does not suppor t v1/v2, and silently dis-
cards the incoming packet.

•

If SNMPv3 is disabled, the firmware will not respond to SNMPv3 traffic, nor generate 
SNMPv3 notifications. The firmware behaves as if it does not suppor t v3 and silently 
discards the incoming packet.

Turns SNMPv3 off or on.