Motorola 7.7.4 用户手册

272

Specifies the administrator or user password for a Motorola Netopia® Gateway. When you 

enter the 

command, you are prompted to enter the old pass-

word (if any) and new password. You are prompted to repeat the new password to verify 
that you entered it correctly the first time. To prevent anyone from obser ving the password 
you enter, characters in the old and new passwords are not displayed as you type them. 
For security, you cannot use the “step” method to set the system password.

A password can be as many as 8 characters. Passwords are case-sensitive. 

Passwords go into effect immediately. You do not have to restar t the Motorola Netopia® 
Gateway for the password to take effect. Assigning an administrator or user password to a 
Motorola Netopia® Gateway does not affect communications through the device. 

ip_address | dns_name ]

server_name")

string@domain_name")

string"):

The hear tbeat setting is used in conjunction with the configuration ser ver to broadcast con-
tact and location information about your Gateway. You can specify the 

protocol, port, IP-, 

port-, and URL-server. 

•

The 

interval setting specifies the broadcast update frequency. Part of sequence con-

trol. The inter val is the spacing between hear tbeats, in d:h:m:s.

•

The 

contact-email setting is a quote-enclosed text string giving an email address for 

the Gateway’s administrator. 

•

The 

location setting is a text string allowing you to specify your geographical or other 

location, such as “Secaucus, NJ.”

•

 The 

number setting is part of the sequence control. This is the number of heartbeats 

to send, at each “inter val”, before sleeping. For example, if this is 20, in the above lay-