Motorola DSR207 用户手册

下载
页码 18
   
 
10 
CONNECTING YOUR DSR  
Make sure that the satellite receiver is not plugged into a power source before you connect any cables 
to the receiver. First connect the satellite input from your satellite dish to your receiver. 
There are several options to connect your DSR, and not every DSR model, TV, or other component 
includes all of the connection types described below. Review the appropriate manuals if necessary to 
determine the best connection for your system. 
Video: Use Composite video output (better), S-Video output (best for standard definition), Component 
video, or DVI outputs (best for high definition) to connect the DSR directly to your television, VCR, and 
home theater A/V receiver. 
Channel 3/4 RF modulator output to TV: If your TV is equipped with only one signal input connection 
(usually labeled Antenna/CATV input), connect the DSR’s modulated RF output to TV input to receive 
picture and sound with your TV tuned to either channel 3 or 4, depending on the channel 3/4 slide 
switch setting on the back of your DSR. 
Audio: The modulated RF output also provides audio along with video to televisions or VCRs (good). 
Utilize the stereo audio output (better) or the coaxial or optical Digital audio outputs (best) to connect 
the DSR directly to your television, VCR, and home theater A/V receiver.