Clarion DRZ9255 用户手册

DRZ9255

DRZ9255

DRZ9255

1. When the inside of the car is very cold and the

player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper playback
may not be possible. If moisture forms on the
disc, wipe it off with a soft cloth. If moisture
forms on the optical parts of the player, do not
use the player for about one hour. The
condensation will disappear naturally allowing
normal operation.

2. Driving on extremely bumpy roads which

cause severe vibration may cause the sound
to skip.

3. This unit uses a precision mechanism. Even in

the event that trouble arises, never open the
case, disassemble the unit, or lubricate the
rotating parts.

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.

This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation.

If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to consult the dealer or
an experienced radio/TV technician for help.

TH I S  DEVICE COMPLIES  WITH  PART  15  OF  THE  FCC  RULES.

OPERATION  IS SUBJECT TO THE  FOLLOWING TWO  CONDITIONS: 

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 

(2) THIS DEVICE MUST  

ACCEPT ANY INTERFERENCE  RECEIVED,

 INCLUDING  INTERFERENCE  THAT  MAY  CAUSE  UNDESIRED 

OPERATION.

THIS  PRODUCTION  COMPLIES  WITH  DHHS  RULES   21  CFR 
SUBCHAPTER   J  APPLICABLE  AT  DATE  OF  MANUFACTURE.

CLARION CO.,LTD.
50 KAMITODA,TODA-SHI,SAITAMA-KEN,JAPAN

MANUFACTURED:

SERIAL No.
PE-

Clarion Co.,Ltd.
MADE IN          

Use only compact discs bearing the 

 or

 mark.

Do not play heart-shaped, octagonal, or other
specially shaped compact discs.

Some CDs recorded in CD-R/CD-RW mode
may not be usable.

• Compared to ordinary music CDs, CD-R and

CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played. Therefore,
do not leave them for a long time in the car.

• New discs may have

some roughness
around the edges. If
such discs are used,
the player may not
work or the sound
may skip. Use a ball-
point pen or the like
to remove any
roughness from the edge of the disc.

• Never stick labels on the surface of the compact

disc or mark the surface with a pencil or pen.

• Never play a compact disc with any

cellophane tape or other glue on it or with
peeling off marks. If you try to play such a
compact disc, you may not be able to get it
back out of the CD player or it may damage
the CD player.

• Do not use compact discs that have large

scratches, are misshapen, cracked, etc. Use of
such discs may cause misoperation or damage.

• To remove a compact disc from its storage case,

press down on the center of the case and lift the
disc out, holding it carefully by the edges.

• Do not use commercially available CD

protection sheets or discs equipped with
stabilizers, etc. These may damage the disc or
cause breakdown of the internal mechanism.

• Do not expose compact discs to direct sunlight

or any heat source.

• Do not expose compact discs to excess

humidity or dust.

• Do not expose compact discs to direct heat

from heaters.

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the center
of the compact disc to the circumference.

• Do not use any solvents, such as commercially

available cleaners, anti-static spray, or thinner
to clean compact discs.

• After using special compact disc cleaner, let

the compact disc dry off well before playing it.

Ball-point pen

Roughness

: Filter indication

: Speaker indication

: Disc indication
: Scan indication
: Repeat indication
: Random indication

: Mute indication

: Manual indication

: Stereo indication

: Enter indication

: Cursor indication

: Range adjustment indication

Operation status indication 
Titles, frequency, clock, etc. are displayed.

Digital Output

• When a 5.1ch surround decoder is connected,

switch the set to direct mode.

Digital Intput

• When the optical digital cable is connected to

or disconnected from this set later, press the
function button while holding down direct
buttons [1] and [6] with the power OFF to
perform a system check.
Though pressing the reset button also
performs a system check, the contents of
memory will be erased completely in this
case.

• When the digital input of a DVD changer is

connected, read the Owner's Manual provided
with the DVD changer, and change "AUDIO
OUT" in the "GENERAL SET UP" menu to
"SPDIF/PCM".
When "AUDIO OUT" is set to "SPDIF/RAW",
DIGITAL/dts audio is not output. Also, noise is
sometimes output.