Motorola LS4208 用户手册

This chapter includes commonly used bar codes to customize how data is transmitted to the host device. Refer to 
the Advanced Data Formatting Programming Guide p/n 72-69680-xx for further customization options.

The scanner ships with the settings shown in the 

 (also 

 for all host device and miscellaneous scanner defaults). If the 

default values suit requirements, programming is not necessary. 

To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile 
memory and are preserved even when the scanner is powered down.

If not using a Synapse or USB cable, select a host type (see each host chapter for specific host information) after 
the power-up beeps sound. This is only necessary upon the first power-up when connected to a new host.

To return all features to default values, scan a default bar code in 

. Throughout the 

programming bar code menus, default values are indicated with asterisks (

).

In most cases, scan one bar code to set a specific parameter value. Other parameters, such as Prefix Value, 
require scanning several bar codes. See each parameter for descriptions of this procedure.

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Feature/Option

*

 Indicates Default