Motorola VC5090 用户手册

Installation 2 - 37

Tap the 

tab.

Tap the 

 radio button.

Tap 

.

The optional Vehicle In-Motion Detector cable blanks the screen and disables use of the vehicle computer when 
the vehicle is in motion. 

The customer must install a switch that is engaged when the vehicle accelerator pedal is not depressed (See 

). When the pedal is not depressed, the switch is activated (closed) and sends a signal to 

the vehicle computer indicating that the pedal is not depressed. When the accelerator pedal is depressed the 
switch disengages and the signal removed. The screen blanks and the touch screen and keyboard are disabled.

The customer must install a switch that is disengaged when the vehicle accelerator pedal is not depressed (See 

). When the pedal is not depressed, the switch is inactive (open) and no signal is sent to 

the vehicle computer indicating that the pedal is not depressed. When the accelerator pedal is depressed the 
switch engages and a signal is sent to the vehicle computer. The screen blanks and the touch screen and 
keyboard are disabled.

Whenever the vehicle is in motion (accelerator pedal is depressed) and the Terminal Locking feature is enabled, 
the vehicle computer display blanks. When the accelerator pedal is not depressed, the vehicle computer does not 
unlock immediately. Instead, the 

 timer initiates during which the vehicle computer 

continues to remain locked. This ensures that the vehicle computer doesn’t unlock and lock during any momentary 
disengagement of the accelerator pedal. While the 

 timer is running, the touch screen, 

backlight and keyboard are disabled. After this timer expires, the 

 timer initiates. While this 

This feature is only available on vehicle computers with OEM version 05.26.0000 or higher. See 

 for instructions to determine the OEM version of the software.