Crestron clw-dim1 dims1 slvd1 用户手册
CLW-DIM1, DIMS1, & SLVD1(W/A/B)
SIMPL Windows
Restoring Default Settings
To restore the dimmer’s default settings for lighting
levels, preset fade time (two seconds), and ramp time
(five seconds), move the mode selection switch to the
PRE position. While holding the pushbutton, move the
mode selection switch to the ADJ position and back to the
PRE position. Release the pushbutton. The LED will flash
to confirm that the default values have been restored.
levels, preset fade time (two seconds), and ramp time
(five seconds), move the mode selection switch to the
PRE position. While holding the pushbutton, move the
mode selection switch to the ADJ position and back to the
PRE position. Release the pushbutton. The LED will flash
to confirm that the default values have been restored.
SIMPL Windows is Crestron’s premier software for
programming Crestron control systems.
programming Crestron control systems.
NOTE: While SIMPL Windows can be used to program
the CLW-DIM1, it is recommended to use D3 Pro for
configuring a Crestron lighting system.
the CLW-DIM1, it is recommended to use D3 Pro for
configuring a Crestron lighting system.
• In Configuration Manager, incorporate a CLW-DIM1
into the system by dragging the CLW-DIM1 from the
Lighting | Wall Dimmers/Switches (Cresnet CLW
Series) folder of the Device Library and dropping it
in the System Views. Double click a device to open
the “Device Settings” window and change the Net ID
if required. The ID code specified in the SIMPL
Windows program must match the Net ID of each
unit.
Lighting | Wall Dimmers/Switches (Cresnet CLW
Series) folder of the Device Library and dropping it
in the System Views. Double click a device to open
the “Device Settings” window and change the Net ID
if required. The ID code specified in the SIMPL
Windows program must match the Net ID of each
unit.
Setup & Programming
Required Software
Software
TASK
REQUIRED SOFTWARE VERSION
Program control
system to operate
CLW-DIM1.
system to operate
CLW-DIM1.
SIMPL™ Windows
®
version
2.07.32 or later with SIMPL+ Cross
Compiler version 1.1 or later and
Library update 387 or later; Also
requires Crestron Database
version 18.1.5 or later.
Compiler version 1.1 or later and
Library update 387 or later; Also
requires Crestron Database
version 18.1.5 or later.
Upload program
and firmware.
and firmware.
Crestron Toolbox 1.02.29 or later.
Program with
simple wizards for
lighting systems
using a CLW-DIM1
(optional but
recommended).
simple wizards for
lighting systems
using a CLW-DIM1
(optional but
recommended).
Crestron D3 Pro™ version 2.1.7 or
later with D3 Pro Templates
version 2.0.1 or later. Refer to
software release notes or Crestron
website for other required Crestron
software packages.
later with D3 Pro Templates
version 2.0.1 or later. Refer to
software release notes or Crestron
website for other required Crestron
software packages.
• In Programming Manager, assign signal names to
program the CLW-DIM1 to operate with the control
system.
system.
For additional details, download SIMPL Windows from
the Crestron website and examine the extensive help file.
the Crestron website and examine the extensive help file.
Setup
The Net ID of the CLW-DIM1 has been factory set to 80.
The Net IDs of multiple CLW-DIM1 devices in the same
system must be unique. Net IDs are changed from a
personal computer (PC) via the Crestron Toolbox. When
setting the Net ID, the Net ID of each unit must match an
ID code specified in the SIMPL Windows program.
The Net IDs of multiple CLW-DIM1 devices in the same
system must be unique. Net IDs are changed from a
personal computer (PC) via the Crestron Toolbox. When
setting the Net ID, the Net ID of each unit must match an
ID code specified in the SIMPL Windows program.
For more details, refer to the Crestron Toolbox help file.
D3 Pro
Crestron D3 Pro Software provides all the tools necessary
to create a complete Crestron Lighting System for
residential applications. The lighting system includes the
control system program, touchpanel screens and keypad
programming, documentation, and real-time lighting
adjustment capabilities. As with all Crestron software, the
D3 Pro software provides extensive right-click and drag-
and-drop functionality, in addition to convenient
keyboard shortcuts for frequently used functions and
commands.
to create a complete Crestron Lighting System for
residential applications. The lighting system includes the
control system program, touchpanel screens and keypad
programming, documentation, and real-time lighting
adjustment capabilities. As with all Crestron software, the
D3 Pro software provides extensive right-click and drag-
and-drop functionality, in addition to convenient
keyboard shortcuts for frequently used functions and
commands.
For additional details, download D3 Pro from the
Crestron website and examine the extensive help file.
Crestron website and examine the extensive help file.
Installation Guide – DOC. 6250A
Stand Alone Wall Box Dimmer: CLW-DIM1, DIMS1, & SLVD1
• 7