Creda hb41304 用户手册

The cooker is designed to match the depth of standard 600mm worktops. An adaptor 
backplate should, therefore, be fitted within the shaded area shown to allow the cooker
to be pushed fully to the wall. If a forward facing backplate is used, it must be chased 
into the wall.

Connection to the cooker should be made with an approved appliance flexible 
connection to BS 669.  A length of 0.9 to 1.25m  is recommended. The length of hose 
chosen should be such that when the cooker is in situ, the hose does not touch the 
floor.

The temperature rise of areas at the rear of the cooker that are likely to come in contact 
with the flexible hose do not exceed 70

o

C.

22