Chevrolet monte carlo 1999 用户手册

1. Grasp the front and rear center of the dome lamp

cover at the same time. Then squeeze and pull
downward. (To help pry the sides loose, a
screwdriver may be used as an aid during 
this procedure.)

2. Remove the old bulb from the small prongs

extending from the dome lamp base plate; hook the
new bulb onto the prongs.

3. To replace the bulb cover, center it over the base

plate, making sure both the cover and the base plate
line up properly. Snap the cover firmly into place.

For any bulb changing procedure not listed in 
this section, contact your Chevrolet dealer 
service department.

1. Turn on the wipers to the low wipe setting.

2. Turn off the ignition while the wipers are at the 

outer positions of the wiper pattern. The blades are
more accessible for removal/replacement while in
this position.

3. Pull the windshield wiper arm away from 

the windshield.