GE dect 9115 用户手册

8

No dial tone
•  Check or repeat installation steps:
  Make sure the base power cord is connected to a working 

electrical outlet.

  Make sure the telephone line cord is connected to the 

base and the wall jack.

•  Connect another phone to the same jack. If it doesn’t 

work, the problem might be your wiring or local service.

•  The handset may be out of range of the base. Move closer 

to the base.

•  Make sure the battery is properly charged (for 16 hours).
•  Make sure the battery pack (in the handset) is properly 

installed.

•  The handset should beep when you press the TALK/

CALL BACK button, and the charge indicator on the base 

should be lit when the handset rests in the cradle. If not, 

the battery may need to be charged.

•  Place handset in charge cradle for at least 0 seconds to 

reset the unit.