Directed Electronics viper 9252 用户手册

8

© 2009 Directed Electronics. All rights reserved.

that the MTS mode is properly set when parking. If MTS mode is not 
properly set or is defeated after being properly set the system will not 
start the engine.

With the engine running and transmission in NEUTRAL position, 

1. 

set the parking brake and leave the engine running. All Doors 
should be closed.
Release

2. 

 the foot brake (if pressed during Step 1), or press and 

release the foot brake anytime. As long as the engine is running 
there is no time limit to perform this step.
Within 20 seconds of foot brake release, 

3. 

press the 

 

button on 

the remote, after 20 seconds return to Step 2.
The vehicle lights flash 5 times to confirm MTS mode enable and 

4. 

the remote start activates the ignition outputs. 
Turn

5. 

 Off and remove the key from the ignition switch, the engine 

remains running.
Exit

6. 

 the vehicle, close all the doors and lock the system.

The engine turns off after a few seconds. 

7. 
You can now remote start the vehicle. If a door is opened before 
the next remote start activation, the system will not remote start the 
vehicle. 

To drive your automatic or manual transmission vehicle after it has 
been remote started:

Get in without stepping on the brake. 

1. 

Insert the ignition key and turn it to the On position.   

2. 

Now, step on the brake. The remote start turns off. 

3. 

The vehicle is ready to drive. 

4.