Denso ofice pro 36 用户手册
28
TROUBLESHOOTING
Check the following items before calling a qualified technician.
If symptoms persist after the above actions have been taken, turn the unit off,
disconnect the power cord plug and contact your MovinCool reseller.
disconnect the power cord plug and contact your MovinCool reseller.
SYMPTOM
POSSIBLE CAUSE
REMEDY
Unit does not operate.
1. Ground fault breaker trip or
LCDI power cord trip.
Reset breaker or reset power
cord.
cord.
2. Drain tank is full.
(“TANK FULL” LED flashes.)
Empty the drain tank.
3. High pressure switch
activated 10 times in 24hours.
1. Clean air filter.
2. Check inlet and outlet air, and
2. Check inlet and outlet air, and
make sure that there were
not any object that may
prevent air flow into or out
from the unit.
not any object that may
prevent air flow into or out
from the unit.
3. Check environmental
condition whether it is within
operation range or not.
operation range or not.
4. Reset controller
Insufficient cooling.
1. Dirty/Blocked air filters.
Clean air filter.
2. Air inlet/outlet blocked.
Clean air inlet/outlet.
3. Improper temperature setting.
Adjust temperature setting.