ICOM IC-F7000 用户手册
8
2
BASIC OPERATION
2
D
Using the keypad
Enter the number of the desired channel number
using the keypad (0 to 9), then push
using the keypad (0 to 9), then push
[OK
≈
≈
]
on the
FRONT panel or microphone.
This way is convenient for remembering the usage
and stored channel number, or when changing large a
number of channels.
and stored channel number, or when changing large a
number of channels.
• Pushing
[
Ω
Ω
CLR]
clears input digits and retrieves the chan-
nel.
[EXAMPLE]:
Selecting channel 20
Push
Push
Push
Blinks
2
ABC
0
@?
OK
RADTEL
USB
USB
HI
--
0:55
RX
0.499.9
SELCALL
LSB
LSB
HI
--
0:55
RX
8.800.0
SELCALL
LSB
LSB
HI
--
0:55
RX
8.800.0
Blinks
Microphone
[OK
≈
]
[10-k
ey
]
or
[OK
≈
]
[10-key]
Scan function repeatedly scans programmed chan-
nels. This function is convenient to wait for calls on
multiple channels.
nels. This function is convenient to wait for calls on
multiple channels.
q Push
[MUTE]
several times to select the voice
mute.
• The mute type indicator “V” appears.
w Push
[SCAN]
to start the scan.
• The “Scanning” indicator appears.
e When a signal is received, channel scan pauses
on that channel.
r Push any key to cancel the scan.
NOTE:
The scan resume condition (the action after
signal receiving) can be selected as ‘SCAN RE-
SUME’ in the
SUME’ in the
Initial set mode
. (p. 45)
[MUTE] [SCAN]
■
Scan function