Linak techline la36 用户手册
5
Safety instructions
Please read the following safety information carefully.
Ensure that all staff who are to connect, mount, or use the actuator are in
possession of the necessary information and that they have access to this user
manual.
possession of the necessary information and that they have access to this user
manual.
Persons who do not have the necessary experience or knowledge of the
product/products must not use the product/ products. Besides, persons with
reduced physical or mental abilities must not use the product/products,
unless they are under surveillance or they have been thoroughly instructed
in the use of the apparatus by a person who is responsible for the safety of
these persons.
product/products must not use the product/ products. Besides, persons with
reduced physical or mental abilities must not use the product/products,
unless they are under surveillance or they have been thoroughly instructed
in the use of the apparatus by a person who is responsible for the safety of
these persons.
Moreover, children must be under surveillance to ensure that they do not
play with the product.
play with the product.
Before you start mounting/dismounting, ensure that the following points
are observed:
• The actuator is not in operation.
• The mains current supply is switched off and the plug has been pulled out.
• The actuator is free from loads that could be released during this work.
are observed:
• The actuator is not in operation.
• The mains current supply is switched off and the plug has been pulled out.
• The actuator is free from loads that could be released during this work.
Before you put the actuator into operation, check the following:
• The actuator is correctly mounted as indicated in the relevant user instructions.
• The equipment can be freely moved over the actuator’s whole working
area.
• The actuator is connected to a mains electricity supply/transformer with
the correct voltage and which is dimensioned and adapted to the actuator
in
• The actuator is correctly mounted as indicated in the relevant user instructions.
• The equipment can be freely moved over the actuator’s whole working
area.
• The actuator is connected to a mains electricity supply/transformer with
the correct voltage and which is dimensioned and adapted to the actuator
in
question.
During operation
• Listen for unusual sounds and watch out for uneven running. Stop the
actuator immediately if anything unusual is observed.
• Listen for unusual sounds and watch out for uneven running. Stop the
actuator immediately if anything unusual is observed.
When the equipment is not in use
• Switch off the mains supply or pull out the plug in order to prevent
unintentional
• Switch off the mains supply or pull out the plug in order to prevent
unintentional
operation.
Classification
The equipment is not suitable for use in the presence of a flammable
anaesthetic mixture with air or with oxygen or nitrous oxide.
The equipment is not suitable for use in the presence of a flammable
anaesthetic mixture with air or with oxygen or nitrous oxide.