GE simon 60-875 用户手册
Simon Security System
8
Status Beeps
Note
You may receive a different
number of status beeps if
buttons are pressed quickly
You may receive a different
number of status beeps if
buttons are pressed quickly
Status beeps are used to indicate key presses, status, and problems with the system.
They can be enabled or disabled (see “Options”). The following table describes status
beep activity.
They can be enabled or disabled (see “Options”). The following table describes status
beep activity.
.
Alarm Sirens and Lamp Modules
Exterior and interior sirens make 3 different alarm sounds on the premises, each indi-
cating a different type of alarm. Sirens are programmed by the installer to time-out and
stop sounding after a specified time.
cating a different type of alarm. Sirens are programmed by the installer to time-out and
stop sounding after a specified time.
Use the following table to understand the siren sounds used by the security system.
Temporal 3 refers to a continuous pattern of 3 siren pulses then off for 1.5 seconds, 3
siren pulses then off for 1.5 seconds.
Temporal 3 refers to a continuous pattern of 3 siren pulses then off for 1.5 seconds, 3
siren pulses then off for 1.5 seconds.
Status Beeps
Activity
Beep Response
ARM Doors & Windows
Exit delay and Entry delay beeps sound 2 times
every 5 seconds and 2 times per second during
the last 10 seconds (if Silent Exit is used, the Exit
delay beeps will only sound twice when you arm
and twice when the Exit delay expires)
ARM Motion Sensors
Exit delay and Entry delay beeps sound 3 times
every 5 seconds and 3 times per second during
the last 10 seconds (if Silent Exit is used, the Exit
delay beeps will only sound 3 times when you arm
and 3 times when the Exit delay expires)
ARM Doors/Windows &
Motion Sensors
Exit delay and Entry delay beeps sound 4 times
every 5 seconds and 4 times per second during
the last 10 seconds (if Silent Exit is used, the Exit
delay beeps will only sound 4 times when you arm
and 4 times when the Exit delay expires)
DISARM
1 beep
CHIME DOORS
2 beeps (feature must be programmed by installer)
CHIME SPECIAL MOTION
3 beeps (feature must be programmed by installer)
Trouble Beeps
6 beeps every minute. Press the SYSTEM STA-
TUS button to stop beeps for 4 hours
No Activity Beeps
20 beeps every minute for 5 minutes (feature must
be programmed by the installer)
Alarm Siren and X10 Light Information
Fire
Intrusion
Emergency
X10 Lights
Steady
Flashing
Steady
X10 Siren
Steady
Steady
Alarm beeps
Interior & Panel Siren
Temporal 3
Steady
Fast on/off
Exterior Siren
Temporal 3
Steady