GE 21115 用户手册
1
NOTE: If you dial more than 14 digits, the display only shows the last 14
digits.
Follow the procedure above to make external calls with the base unit’s
speakerphone by pressing the SPEAKER button located on the base. When
finished, press the SPEAKER button on the base to hang up.
Pre-dialing:
1. Make sure the phone is OFF (not in TALK mode).
2. Dial the number you want to call. The telephone number shows in
Pre-dialing:
1. Make sure the phone is OFF (not in TALK mode).
2. Dial the number you want to call. The telephone number shows in
the display.
NOTE: If you make a mistake with the pre-dial number, you may use
NOTE: If you make a mistake with the pre-dial number, you may use
the 5 or 6 buttons to move the cursor forward or backward in
the display, use the DELETE button to remove the wrong digit, and enter
the correct digit.
3. Press the TALK button on the handset. The number automatically dials.
4. When finished, press the TALK button again, to hang up. The call duration
4. When finished, press the TALK button again, to hang up. The call duration
shows in the display.
NOTE: You may enter up to 30 pre-dial digits but only the last 14 digits
NOTE: You may enter up to 30 pre-dial digits but only the last 14 digits
show in the display.
Follow the procedure above to make external calls with the base unit’s
speakerphone by pressing the SPEAKER button located on the base. When
finished, press the SPEAKER button on the base to hang up.
A
nswEring
c
Alls
1. When the phone rings pick up the handset, and press the TALK button.
2. When finished, press the TALK button again to hang up.
2. When finished, press the TALK button again to hang up.
NOTE: When any handset is using the line, LINE IN USE shows in the
display of all registered handsets.
You may also answer calls with the base by pressing the SPEAKER button on
the base.
c
All
t
imEr
After you press the TALK button to make or answer a call, the built-in call timer
shows on the display and counts the duration of the call in minutes
and seconds.
v
olumE
The handset, headset and speakerphone loudness can be adjusted independent
of each other.
H
AndsEt
r
EcEivEr
v
olumE
When in handset mode, adjust the cordless handset receiver volume by
pressing Volume 5/6 keys on the handset. There are five volume levels. You
will hear a warning tone when the volume reaches the maximum or minimum
level.
NOTE: If you do not press the volume 5 or 6 button within 5 seconds,
the display returns to the previous menu.