Cisco Systems 3120 用户手册
2-6
Cisco AVS 3120 Application Velocity System Hardware Installation Guide
OL-11805-01
Chapter 2 Preparing for Installation
Preparing Your Site for Installation
Figure 2-1
Chassis ESD Wrist Strap Ground Example
Step 4
Connect the work surface to the chassis using a grounding cable and alligator clip.
Caution
Always follow ESD-prevention procedures when removing, replacing, or repairing components.
Preparing Your Site for Installation
This section describes the requirements your site must meet for safe installation and operation of your
AVS 3120. Before you select an installation site for the AVS 3120, read the electrical, environmental,
and physical requirements as described in
AVS 3120. Before you select an installation site for the AVS 3120, read the electrical, environmental,
and physical requirements as described in
Ensure that your site is
properly prepared before beginning installation.
This section includes the following topics:
•
•
•
•
•
•
•
DO NOT INSTALL INTERFACE
CARDS WITH POWER APPLIED
CONSOLE
10/100 ETHERNET 0/0
Link
FDX
FDX
100 Mbps
Link
100 Mbps
FAILOVER
10/100 ETHERNET 0/0
PIX-515
24304
Copper foil