Chevrolet corvette 2000 用户手册

1. Turn the roof panel so that the rear edge of the panel is 

facing the storage area. The locating pins (at the rear of 
the panel) should point toward the egg

-

shaped stowage 

receivers on the floor of the center compartment.

2. Push the panel forward until the pins bottom out in

the receivers.

3. There are two spring

-

loaded storage pins on the rear 

wall of the storage compartment (A). These storage pins 
go into the slots on each side of the roof panel (B).

4. Gently lower the roof panel onto the carpeted ledge.

Then, pull each release rearward and upward to place
the storage pins into the holes of the roof panel.

5. Gently lift and lower the roof panel to be sure it is

locked into place.