Chevrolet corvette 2000 用户手册

The odometer shows how far your vehicle has been
driven in either miles or kilometers. Press the TRIP
button to display odometer readings such as:
D ODOMETER 12345 MI or
D ODOMETER 20008 km
Without the keys in the ignition, you can also display the
odometer by turning on the parking lamps.

There are two trip odometers. Press the TRIP button and
TRIP A will be displayed. Press it again and TRIP B
will be displayed. TRIP A could be used to track the
distance to a destination. TRIP B could be used to track
maintenance periods.
D TRIP A 130.5 MI or
D TRIP A 209.9 km
D TRIP B 300.5 MI or
D TRIP B 483.5 km
The trip odometers can be reset by pushing the RESET
button on the DIC. Both of the trip odometers can be
used simultaneously.

You can also display number of miles (kilometers)
driven since you last started the vehicle if you press and
hold the RESET button for two seconds, then release.
The miles (or kilometers) since the last ignition cycle
will be set into the trip odometer.

Press the TRIP button until ELAP. TIME is displayed,
such as ELAP. TIME 00:00:00.00

When the ignition is in ON, the Driver Information
Center (DIC) can be used as a stopwatch. The display
can show hours, minutes, seconds and hundredths of 
a second. The elapsed time indicator will record up to 
99 hours, 59 minutes and 59 seconds, then it will reset to
zero and continue counting. (Hundredths are shown up
to 59 minutes, 59 seconds and 99 hundredths). The
display appears as ELAP. TIME 00:00:00.00 in the
elapsed time function.

You can start or stop the elapsed time by pressing
RESET. To reset the elapsed time to zero, stop the 
timer by pressing RESET. Then press and hold RESET
until ELAP. TIME 00:00:00.00 appears in the DIC.