Chevrolet corvette 2000 用户手册

There is a blank page at the end of the OPTIONS menu.
When the blank page is displayed, you can access the
following items:

FOB TRAINING: This option allows you to match 
the RKE transmitter(s) to your vehicle. You can access
this option by pressing and holding RESET for three
seconds while you are on the blank page at the end of
the OPTIONS menu. The message FOB TRAINING
will be displayed. See “Matching Transmitter(s) To Your
Vehicle” in the Index for more information.

TIRE TRAINING: The Tire Pressure Monitor (TPM)
operates with battery

-

powered sensors that are located

inside the valve stems on each tire. Each sensor has a
unique ID code so the vehicle knows the tire location of
the sensor. When the vehicle reaches a speed of greater
than 15 mph (24 km/h), the sensors begin to send the
tire pressure readings to a receiver inside the vehicle.
These readings are displayed when using the GAGES
button on the DIC. If you are unable to display your tire
pressures while the vehicle speed is greater than 15 mph
(24 km/h), you may need to have your sensor ID codes
learned by the vehicle. See your dealer.

The following messages and warnings may appear in 
the DIC display. The DIC display area is located in the
instrument panel cluster below the speedometer and
tachometer, directly above the steering column. 
You may receive more than one message at a time.
Messages will appear one behind the other. To
acknowledge a message and remove it from the 
display, press RESET. You may scroll through the
messages that may have been sent at the same time. 
The message center is continuously updated with the
vehicle performance status.

When your anti

-

lock system is adjusting brake pressure

to help avoid a braking skid, the ABS ACTIVE message
will be displayed.

Slippery road conditions may exist if this message 
is displayed, so adjust your driving accordingly. 
The message will stay on for a few seconds after the
system stops adjusting brake pressure.