Chevrolet corvette 2000 用户手册
3-5
When adjusting the temperature, start with a driver
-
set
temperature of 73
_F (23_C) until you determine your
comfort zone. If you choose 60
_F (16_C), the
system will remain at maximum cooling and will not
automatically adjust fan speed or air delivery. If you
choose 90
automatically adjust fan speed or air delivery. If you
choose 90
_F (32_C), the system will remain at
maximum heating and will not automatically adjust fan
speed or air delivery. Choosing either maximum setting
will not cause the system to heat or cool any faster.
Turning the knob past either maximum setting has no
effect on the operation of the system.
speed or air delivery. Choosing either maximum setting
will not cause the system to heat or cool any faster.
Turning the knob past either maximum setting has no
effect on the operation of the system.
Passenger Temperature Offset
The PASSENGER knob changes the temperature on the
passenger’s side of the vehicle. When the knob is in
the 12 o’clock position, the passenger’s temperature is
the same as the driver’s. Turn the knob clockwise for
warmer air on the passenger’s side, counterclockwise
for cooler air. If the driver
passenger’s side of the vehicle. When the knob is in
the 12 o’clock position, the passenger’s temperature is
the same as the driver’s. Turn the knob clockwise for
warmer air on the passenger’s side, counterclockwise
for cooler air. If the driver
-
set temperature is set at 60
_F
(16
_C) or 90_F (32_C), turning the passenger knob
has no effect because the system is locked at a
maximum setting.
maximum setting.
Automatic Operation
Press the AUTO button to place the entire system in the
automatic mode. After a five
automatic mode. After a five
-
second display of the
current settings, only the word AUTO and the outside
temperature will be shown on the digital display. The
system will operate to achieve your comfort set
temperature as quickly as possible. If you have set the
driver temperature at 60
temperature will be shown on the digital display. The
system will operate to achieve your comfort set
temperature as quickly as possible. If you have set the
driver temperature at 60
_F (16_C) or 90_F (32_C),
the system will not operate automatically until a
different temperature is selected. The AUTO control
system works best with the windows up and the
removable roof installed or the convertible top up.
different temperature is selected. The AUTO control
system works best with the windows up and the
removable roof installed or the convertible top up.
A Typical Cold Weather Example:
Your vehicle has been parked outside overnight in cold
weather (below 32
weather (below 32
_F/ 0_C) and you have set the driver
temperature at 73
_F (23_C) and have selected the
AUTO mode. The system will automatically adjust the
temperature output to maximum heating. The fan will
start at a low speed. This is to avoid blowing cold air
into the vehicle. The length of the delay depends on the
amount of time since the engine was last started, the
outside temperature and the engine coolant temperature.
As the coolant warms up, the fan speed will gradually
increase. Air will flow to the floor with some air to
the windshield to prevent fogging under most
normal conditions.
temperature output to maximum heating. The fan will
start at a low speed. This is to avoid blowing cold air
into the vehicle. The length of the delay depends on the
amount of time since the engine was last started, the
outside temperature and the engine coolant temperature.
As the coolant warms up, the fan speed will gradually
increase. Air will flow to the floor with some air to
the windshield to prevent fogging under most
normal conditions.