Chevrolet corvette 2000 用户手册

1. Insert a coin into the slot on the back of the

transmitter and gently pry apart the front and back.

2. Gently pull the battery out of the transmitter.

3. Put the new battery in the transmitter, positive (+)

side up. Use a battery, type CR2450, or equivalent.

4. Reassemble the transmitter. Make sure to put it

together so water won’t get in.

5. Resynchronize the transmitter. (See

“Resynchronizing Your Transmitter” following.

6. Test the transmitter.

Your RKE system uses a continually changing code 
for increased security. Normally, the receiver in your
vehicle will keep track of this changing code. 
If your vehicle does not respond to your transmitter, 
do the following to determine what’s wrong:

1. Get closer to the vehicle and try pressing a button

again. Your battery may be low. (If so, see “Battery
Replacement” in the Index.)

2. While standing close to your vehicle, press the

LOCK and UNLOCK buttons on your transmitter at
the same time and hold for seven seconds. This will
attempt to resynchronize the security code in your
RKE transmitter.

3. When resynchronization is achieved, the horn 

will chirp.