Chevrolet corvette 2000 用户手册

Use one of the two following items listed here to arm
the system:
D Press the LOCK button on the remote keyless 

entry transmitter.

D Open the door. (The SECURITY light should flash.)

Lock the door with the power door lock switch. 
The SECURITY light will stop flashing and stay on.
Close the door. The SECURITY light should go off.

Use the following to test the system:

1. Make sure the hatch/trunk lid is latched.

2. Lower a window on the door.

3. Manually arm the system.

4. Close the doors and wait 15 seconds.

5. Reach through the open window and manually

unlock the driver’s door.

6. Open the door. The alarm should sound.

7. Turn off the alarm.

If the alarm is inoperative, check to see if the horn
works. If not, check the horn fuse. See “Fuses and
Circuit Breakers” in the Index. If the horn works, but the
alarm doesn’t go off, see your dealer.

Always use your key or the remote keyless entry
transmitter to unlock a door. Unlocking a door any other
way will set off the alarm. If your alarm sounds, 
listed below are the ways you can disarm it:
D Unlock the driver’s door with your key.
D Put the key in the ignition.
D Press the UNLOCK button on the remote keyless

entry transmitter.

Now, if a door or the hatch/trunk lid is opened without
the key or the remote keyless entry transmitter, the
alarm will go off. Your horn will sound for two minutes,
then it will go off to save battery power. And, your
vehicle won’t start.

The theft

-

deterrent system won’t arm if you lock the

driver’s door with a key, the manual door lock, or if you
use the power door lock after the doors are closed.

If your passenger stays in the vehicle when you leave
with the keys, have the passenger lock the vehicle after
the doors are closed. This way the alarm won’t arm, 
and your passenger won’t set it off.